CRESSI Complete Venturi Flow Control – HZ820070.

When the air flow released into the injector towards the mouthpiece increases as it is subjected to the acceleration known as Venturi effect.
The subsequent depression inside the regulator case keeps the seal bent and virtually cancels the second stage inhalation effort.
The Venturi effect stops as soon as the divers stops inhaling. The seal goes back to its original position, the lever pushed by the spring rises and the nozzle is closed by the piston.

In order to enhance the Venturi effect, XS Compact is equipped with a new ergonomic flow deviator in two modes, which are clearly shown on the regulator:
pre-dive and dive (picture below). The former activates a flow limiter placed in the mouthpiece duct, which cancels the Venturi effect and the auto-releasing. With the latter on, the Venturi effect is able to work at its best, increasing the air flow released by the regulator to the maximum level.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI Second Stage Repair Kit Ellipse Titanium – Steel – Black – Octopus Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ810067
• EAN : –
• UPC : –

The post CRESSI Complete Venturi Flow Control – HZ820070 appeared first on My Blog.

CRESSI Ellipse 2nd Stage Purge Bottom – HZ820074.

CRESSI Ellipse 2nd Stage Purge Bottom, CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI Ellipse 2nd Stage Purge Bottom Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ820074
• EAN : –
• UPC : –

The post CRESSI Ellipse 2nd Stage Purge Bottom – HZ820074 appeared first on My Blog.

CRESSI Baffle Cap Exhaust TEE – HZ820066.

After removing the cam-lock key, press with your fingers the main cap of the baffle, and open it outwards as shown in the pictures.
CRESSI Closing Cap Exhaust TEE, CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI Baffle Cap Exhaust TEE Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ820066
• EAN : –
• UPC : –

The post CRESSI Baffle Cap Exhaust TEE – HZ820066 appeared first on My Blog.

CRESSI Ellipse 2nd Stage Ring Diaphragm – HZ810064.

CRESSI Ellipse 2nd Stage Ring Diaphragm, CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI Ellipse 2nd Stage Ring Diaphragm Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ810064
• EAN : –
• UPC : –

The post CRESSI Ellipse 2nd Stage Ring Diaphragm – HZ810064 appeared first on My Blog.

CRESSI Complete Flow Control – HZ810079.

CRESSI Complete Flow Control Maintenance kit, Remove the flow deviator out of it seat as shown in the picture.
CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI Complete Flow Control Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ810079
• EAN : –
• UPC : –

The post CRESSI Complete Flow Control – HZ810079 appeared first on My Blog.

CRESSI Ellipse 2nd Stage Ring Purge Bottom – HZ820073.

CRESSI Ellipse 2nd Stage Ring Purge Bottom, CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI Ellipse 2nd Stage Ring Purge Bottom Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ820073
• EAN : –
• UPC : –

The post CRESSI Ellipse 2nd Stage Ring Purge Bottom – HZ820073 appeared first on My Blog.

CRESSI Compelete Balancing chamber MC5 – MC9 – MC7 – HZ800057.

CRESSI Compelete Balancing chamber MC5 – MC9 – MC7, Use a tool to insert the antiextrusion ring in the balancing chamber.
Insert the OR in the balancing chamber, after greasing it properly.

Note: it is very important to grease the HP valve well, to make it work correctly.

Place the piston spring on the balancing chamber and the HP piston in the same, as shown in the picture.

Note: Be sure the hole through the HP piston leg IS NOT blocked by any foreign body.

CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI Compelete Balancing chamber MC5 – MC9 – MC7 Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ800057
• EAN : –
• UPC : –

The post CRESSI Compelete Balancing chamber MC5 – MC9 . MC7 – HZ800057 appeared first on My Blog.

CRESSI Ellipse 2nd Stage Silicone Diaphragm – HZ810069.

CRESSI Ellipse 2nd Stage Silicone Diaphragm, CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CCRESSI Ellipse 2nd Stage Silicone Diaphragm Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ810069
• EAN : –
• UPC : –

The post CRESSI Ellipse 2nd Stage Silicone Diaphragm – HZ810069 appeared first on My Blog.

CRESSI Spring Guild Plate MC5 – MC7 – MC9 – HZ800081.

CRESSI Spring Guild Plate MC5 – MC7 – MC9, Place the springguide flat on the spring itself and assemble the whole on the 1st stage as shown in the picture.
CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI Spring Guild Plate MC5 – MC7 – MC9 Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ800081
• EAN : –
• UPC : –

The post CRESSI Spring Guild Plate MC5 – MC7 – MC9 – HZ800081 appeared first on My Blog.

CRESSI MC5 PIN – HZ800061.

CRESSI MC5 PIN, After tightening the HP valve, including the filter, by means of the bracket blocking nut (INT model) or the DIN filter body (DIN model), turn the body and insert the pushing pin in its seat.
CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI MC5 PIN Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ800061
• EAN : –
• UPC : –

The post CRESSI MC5 PIN – HZ800061 appeared first on My Blog.