CRESSI Strat Pro Scuba Set.

A COMPLETE SCUBA SET INCLUDING:

1- CRESSI START PRO BCD —- CRESSI START PRO BCD
2- 1ST STAGE MC9
3- 2ND STAGE COMPACT —- CRESSI MC9 – Compact Regulator
4- OCTOPUS COMPACT —- CRESSI Compact Octopus Regulator
5- CONSOLE 2 —- CRESSI Gauge Console 2 (Depth + Pressure)

The post CRESSI Start Pro Scuba Set (Start Pro + MC9 + Compact + Octopus + Console 2) appeared first on My Blog.

CRESSI AC2 – XS Compact Second Stage Regulator – XS Compact Octopus Regulator

CRESSI AC2 First Stage Regulator.

CRESSI AC2 first stage works with a simple piston, an economical and affordable, simple, reliable and robust suitable for intensive usage. It’s a Preferred first stage by diving centers as it is consider it to be a very effective for rental because of its low cost, hardwork and almost inexistent need of maintenance, as well as a surprising level of performance.
Conical filter with high filtering capacity, essential to avoid the entrance of particles from bottles. This feature is especially important for regulators in dive schools and rental.
Flow of air supplied 2100 l/min with an intermediate pressure drop in intensive breathing (150 bar) 0.5-0.8 bar (measurements made in a LP output with the second stage connected and a pressure of 150 bar in the Tank).
Exterior LP regulation by Allen Key, which make revision management and technical services maintenance very easy and efficient.
One 7/16” high pressure port (HP) and four 3/8” low pressure ports (LP).
Complete maintenance kit which includes very affordable spare parts.
Weight: INT: 615 g / DIN 480 g

CRESSI AC2 First Stage Regulator Features

• Piston design.
• 1 x 7/16” HP ports UNF.
• 4 x 3/8” LP ports UNF.
• Operating pressure: INT version: 230 bar | 3,336 psi.
• Calibration pressure: 9.8÷10 bar | 142÷146 psi.
• Brass body Electroless Nickel plated.
• High capacity conical filter electroless nickel plated.
• Long lasting piston: AISI 316 stainless steel.
• Extremely easy in maintenance since IP is adjustable from the outside.
• Stainless steel spring.
• Flow rate: 74.16 cu ft/min (2,100 l/min).
• Yoke version weight: 22.4 oz / 635 g.

CRESSI Compact Second Stage Regulator.

New Extremely simple and less complicated single shell second stage made from ABS and elastomer, compact small size (6 cm in diameter), Very light weight (145 g). Its mechanism and development are perfectly planned to obtain the minimum number of components and very strong.
It is a smart buy due to its combination of performance, reliability, price and cost of maintenance.
It is perfect for uses requiring maximum reliability and ideal as a travel regulator, given its lightness combined with the first stage MC5.
CE Standardization Annex B EN250/2014_A>10°C
It is also perfect for rental in diving centers, as a work regulator with AC2, and as an addition to the high range MC9.
The specific calibration of the inhalation mechanism slightly changes the air delivery as compared to the Ellipse series; the feel and sensitivity of these models is exquisite, with an abundant flow without needing to exploit the Venturi effect.
This feature provides a limited tendency to free flow on the surface and when positioning the equipment in the water, ideal for schools and rentals, octopus and double regulator.
However, the results of the features place it beyond regulators of highest range.
Asymmetrical perforation in the front cap. The water flow starts to push the diaphragm anti-clockwise so that its retraction is perfectly flat and the cam progressively descends perpendicularly, independent of conditions (currents, brisk movements, facial position, etc.).
Exhalation effort particularly reduced without the need to minimize the thickness of the diaphragm. The design of the membrane retention system directs the 100% channeled flow towards the nozzles of the bow, taking advantage of a strong Venturi effect.
Also, it works to direct the bubbles away from the diver’s field of vision.
Embedded membrane to avoid water infiltration in case of brisk turns or jumps to enter the water.
Practically integrated purge button, between 80-400% larger than that of any other regulator on the market to facilitate purging, especially for beginning divers.

CRESSI Compact Second Stage Regulator Features

• Downstream system.
• Adjustable Venturi effect.
• Easy maintenance.
• Weight without hose: 206 g.
• Adjustable intermediate pressure from the out side of the regulator due to our patented ACs design.

CRESSI Compact Octopus Regulator.

Octopus Compact uses the same casing as the Second Stage Compact model made from special hi-tech polymers, the only difference being the yellow front cover.

New Extremely simple and less complicated single shell second stage made from ABS and elastomer, compact small size (6 cm in diameter), Very light weight (145 g). Its mechanism and development are perfectly planned to obtain the minimum number of components and very strong.
It is a smart buy due to its combination of performance, reliability, price and cost of maintenance.
It is perfect for uses requiring maximum reliability and ideal as a travel regulator, given its lightness combined with the first stage MC5.
CE Standardization Annex B EN250/2014_A>10°C
It is also perfect for rental in diving centers, as a work regulator with AC2, and as an addition to the high range MC9.
The specific calibration of the inhalation mechanism slightly changes the air delivery as compared to the Ellipse series; the feel and sensitivity of these models is exquisite, with an abundant flow without needing to exploit the Venturi effect.
This feature provides a limited tendency to free flow on the surface and when positioning the equipment in the water, ideal for schools and rentals, octopus and double regulator.
However, the results of the features place it beyond regulators of highest range.
Asymmetrical perforation in the front cap. The water flow starts to push the diaphragm anti-clockwise so that its retraction is perfectly flat and the cam progressively descends perpendicularly, independent of conditions (currents, brisk movements, facial position, etc.).
Exhalation effort particularly reduced without the need to minimize the thickness of the diaphragm. The design of the membrane retention system directs the 100% channeled flow towards the nozzles of the bow, taking advantage of a strong Venturi effect.
Also, it works to direct the bubbles away from the diver’s field of vision.
Embedded membrane to avoid water infiltration in case of brisk turns or jumps to enter the water.
Practically integrated purge button, between 80-400% larger than that of any other regulator on the market to facilitate purging, especially for beginning divers.

CRESSI Compact Octopus Regulator Features

• Downstream system.
• Adjustable Venturi effect.
• Easy maintenance.
• Weight without hose: 206 g.
• Adjustable intermediate pressure from the out side of the regulator due to our patented ACs design.

The post CRESSI AC2 – XS Compact Second Stage Regulator – XS Compact Octopus Regulator appeared first on My Blog.

CRESSI MC9 – Compact Second Stage Regulator.

This premiere travel regulator packs maximum performance into minimum space.
A true featherweight second stage, the Compact is built from lightweight techno-polymers to eliminate jaw fatigue.
Easy to pack and easy to dive, the Compact includes dive/pre-dive Venturi switch for managing freeflow and maximizing performance at depth.

CRESSI MC9 First Stage Regulator Features

• Balanced diaphragm (seal chamber for MC9SC).
• 2 outlets HP 7/16 UNF.
• 4 outlets MP 3/8 UNF.
• Service pressure: 300 bar (4350 psi) DIN version, 232 bar (3365 psi) Yoke version.
• Calibration pressure: 10 Bar.
• Brass body Electroless Nickel plated.
• High capacity conical filter electroless nickel plated.
• Aisi 316 removable nozzle.
• Hyper-balancing.
• Anti-pressure drop pneumatic spring.
• Setting spring: stainless steel with micropeening treatment.
• Replaceable cylinder with anti-friction and anti-corrosion properties.
• Elastomer protector.
• Flow rate: 4500 l/min.
• ke version weight: 590 gr.
• Yoke version weight: 590 gr.
• Din version weight: 450 gr.

CRESSI Compact Second Stage Regulator Features

• Downstream system.
• Adjustable venturi effect.
• Patented antifriction lever.
• Big purge button.
• Anti-scratch surface.
• Bayonet-type cap holder with security lock.
• Removable exhaust tee.
• Weight without hose: 135 gr.

COMBINATION PERFORMANCE

• Average Cracking effort 6 mbar.
• Average breathing effort 1 J/l.
• JACKETED HOSE extremely light and flexible weight: 153 gr.
• CERTIFICATION EN250/2000.

The post CRESSI MC9 – Compact Regulator appeared first on My Blog.

CRESSI AC2 DIN – Compact Dive Center Edition Second Stage Regulator

CRESSI AC2 DIN First Stage Regulator.

CRESSI AC2 first stage works with a simple piston, an economical and affordable, simple, reliable and robust suitable for intensive usage. It’s a Preferred first stage by diving centers as it is consider it to be a very effective for rental because of its low cost, hardwork and almost inexistent need of maintenance, as well as a surprising level of performance. Conical filter with high filtering capacity, essential to avoid the entrance of particles from bottles. This feature is especially important for regulators in dive schools and rental. Flow of air supplied 2100 l/min with an intermediate pressure drop in intensive breathing (150 bar) 0.5-0.8 bar (measurements made in a LP output with the second stage connected and a pressure of 150 bar in the Tank). Exterior LP regulation by Allen Key, which make revision management and technical services maintenance very easy and efficient. One 7/16” high pressure port (HP) and four 3/8” low pressure ports (LP). Complete maintenance kit which includes very affordable spare parts. Weight: INT: 615 g / DIN 480 g

CRESSI AC2 First Stage Regulator Features

• Piston design.
• 1 x 7/16” HP ports UNF.
• 4 x 3/8” LP ports UNF.
• Operating pressure: INT version: 230 bar | 3,336 psi.
• Calibration pressure: 9.8÷10 bar | 142÷146 psi.
• Brass body Electroless Nickel plated.
• High capacity conical filter electroless nickel plated.
• Long lasting piston: AISI 316 stainless steel.
• Extremely easy in maintenance since IP is adjustable from the outside.
• Stainless steel spring.
• Flow rate: 74.16 cu ft/min (2,100 l/min).
• Yoke version weight: 22.4 oz / 635 g.

CRESSI Compact Dive Center Edition Second Stage Regulator.

New Extremely simple and less complicated single shell second stage made from ABS and elastomer, compact small size (6 cm in diameter), Very light weight (145 g). Its mechanism and development are perfectly planned to obtain the minimum number of components and very strong. It is a smart buy due to its combination of performance, reliability, price and cost of maintenance. It is perfect for uses requiring maximum reliability and ideal as a travel regulator, given its lightness combined with the first stage MC5.
CE Standardization Annex B EN250/2014_A>10°C, It is also perfect for rental in diving centers, as a work regulator with AC2, and as an addition to the high range MC9.

The specific calibration of the inhalation mechanism slightly changes the air delivery as compared to the Ellipse series; the feel and sensitivity of these models is exquisite, with an abundant flow without needing to exploit the Venturi effect. This feature provides a limited tendency to free flow on the surface and when positioning the equipment in the water, ideal for schools and rentals, octopus and double regulator.

However, the results of the features place it beyond regulators of highest range. Asymmetrical perforation in the front cap. The water flow starts to push the diaphragm anti-clockwise so that its retraction is perfectly flat and the cam progressively descends perpendicularly, independent of conditions (currents, brisk movements, facial position, etc.).

Exhalation effort particularly reduced without the need to minimize the thickness of the diaphragm. The design of the membrane retention system directs the 100% channeled flow towards the nozzles of the bow, taking advantage of a strong Venturi effect. Also, it works to direct the bubbles away from the diver’s field of vision. Embedded membrane to avoid water infiltration in case of brisk turns or jumps to enter the water.

Practically integrated purge button, between 80-400% larger than that of any other regulator on the market to facilitate purging, especially for beginning divers.

CRESSI Compact Dive Center Edition Second Stage Regulator Features

• Downstream system.
• Adjustable Venturi effect.
• Easy maintenance.
• Weight without hose: 206 g.
• Adjustable intermediate pressure from the out side of the regulator due to our patented ACs design.

The post CRESSI AC2 – Compact Dive Center Edition Regulator Set appeared first on My Blog.

CRESSI First Stage Repair Kit Int/DIN MC5 – MC9 – MC9SC – HZ800047.

CRESSI original service and repair kits for MC5 and MC9 and MC9SC, CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.
MAINTENANCE KIT 1st STAGES MC5 – MC9 – MC9SC (INT/DIN)

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI First Stage Repair Kit Int/DIN MC5 – MC9 – MC9SC Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ800047
• EAN : 8022983045917
• UPC : 843607033336

The post CRESSI First Stage Repair Kit INT/DIN MC5 – MC9 – MC9SC – HZ800047 appeared first on My Blog.

CRESSI First Stage Repair Kit AC2 INT – HZ730150.

CRESSI original service and repair kits for AC2 INT, CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.
NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI First Stage Repair Kit AC2 INT Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ730150
• EAN : 843607011938
• UPC : 8022983015941

The post CRESSI First Stage Repair Kit AC2 INT – HZ730150 appeared first on My Blog.

CRESSI First Stage Repair Kit Diaphragm MC7 DIN – HZ800071.

CRESSI First Stage Repair Kit Diaphragm MC7 DIN, CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.
NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI First Stage Repair Kit Diaphragm MC7 DIN Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ800071
• EAN : 8022983030517
• UPC : 843607013406

The post CRESSI First Stage Repair Kit Diaphragm MC7 DIN – HZ800071 appeared first on My Blog.

CRESSI First Stage Repair Kit MC5 DIN – HZ800068.

CRESSI First Stage Repair Kit MC5 DIN, CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.
NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI First Stage Repair Kit MC5 DIN Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ800068
• EAN : –
• UPC : –

The post CRESSI First Stage Repair Kit MC5 DIN – HZ800068 appeared first on My Blog.

CRESSI Body + Injector – HZ810068.

CRESSI Body + Injector Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ810068
• EAN : –
• UPC : –

The post CRESSI Body + Injector – HZ810068 appeared first on My Blog.

CRESSI Compelete Balancing chamber MC5 – MC9 – MC7 – HZ800057.

CRESSI Compelete Balancing chamber MC5 – MC9 – MC7, Use a tool to insert the antiextrusion ring in the balancing chamber.
Insert the OR in the balancing chamber, after greasing it properly.

Note: it is very important to grease the HP valve well, to make it work correctly.

Place the piston spring on the balancing chamber and the HP piston in the same, as shown in the picture.

Note: Be sure the hole through the HP piston leg IS NOT blocked by any foreign body.

CRESSI recommend that all CRESSI regulators should annually have a maintenance service and change all significant spare parts to maintain your regulator in good condition.

NOTE: the image may not exactly match the product, it is shown only for illustration.

CRESSI Compelete Balancing chamber MC5 – MC9 – MC7 Features

• Weight : 30 grams
• Dimensions : 15 x 11.5 cm
• Code : HZ800057
• EAN : –
• UPC : –

The post CRESSI Compelete Balancing chamber MC5 – MC9 . MC7 – HZ800057 appeared first on My Blog.