TUSA Sport 5mm Boots.

The new TUSA Sport Boots 5mm neoprene DB0103 is ideal for skin diving or any watersports activity, constructed with durable neoprene material, and features a built-in fin strap holder.

TUSA Sport 5mm Boots Features

• Ideal for skin diving or any watersports activity.
• 5mm neoprene.
• Durable neoprene material construction.
• Built-in fin strap holder.
• material thickness 5mm.
• Department : Unisex-adult.
• Model Number : DB0103.

The post TUSA Sport 5mm Boots DB-0103 appeared first on My Blog.

CRESSI Gara Modular Long Freediving Full Foot Fins.

CRESSI was the first manufacturer to use the thermoplastic rubber-blade foot pocket and also the first one to thermofuse in a single element three different materials to improve the effort transmission. An interchangeable blade which is very lightweight and reactive and also well-adapted for the most demanding of free-diving use. The need to dispose of a removable version to install blades made of carbon or other different materials, leads us to the new Gara Modular, which allows the CRESSI experience with a several materials composition and many features.
The volume of the shoe has been resized after extensive anatomical studies, so that the volumes are proportional to the effect of enlargement that cause the socks depending on the size of the foot, does not follow a fixed proportion size to size as proportionally a small foot “fattens” much more than a large one when you put on the socks.
The new foot pocket combines two materials, a thermoplastic rubber with high hardness (shore 90), flexible but inelastic and really resistant according to the nerves, to the whole foot pocket’s sole and to the exclusive strap over the instep aimed to make the effort transmission to be immediate without dissipate in rubbery compositions.
The instep incorporates on the middle a self-adjusting 2 cm wide strap, which allows a slight expansion (from 2 to 4 mm depending on the size) to fit in people who have high instep or also in case of using thick foot pockets. The expansion has been thoroughly balanced to avoid damaging the energy transmission.
The other foot pocket’s part (grey area) has a flexible composition shore 50º to obtain the maximum comfort. This material extends in the area of the heel to perform a non-slip function when walking on a boat or on rocks.
The original blade is made of high-modulus propylene (2500 Mpa). It has lifelong warranty and highly elastic return. It incorporates two little antiskid spoilers on the final area. The decreasing thickness section (from 4mm to 2mm) causes the highly progressive tonnage eliminating the skid tendency, because the first half of the set is more rigid and the final half is more flexible.

CRESSI Gara Modular Long Freediving Full Foot Finss Features

• Non-Vented Blade Design
• Long Blade with Foot Pocket System
• Perfect Choice for Deep Free Diving and Spear Fishing
• Interchangeable Blade: Allows Diver to Replace Blades for Specific Diving Situations
• Fin Perfect to Grow with as the Diver’s Skill Level Increases
• Interchangeable with CRESSI Long Fiberglass or Carbon Fiber Blades
• Interchange in Minutes without Any Modifications
• Self-Adjusting Multi-Compound Foot Pocket
• Foot Pocket: Comfort and Suppleness / Stiffer Compound Under Foot & Heel Where Power Transfer Takes Place
• Angle of Blade Provides Ultimate in Efficiency During Kick Cycle
• Less Energy to Load Blade
• Comfortably-Worn w/or w/o Neoprene Socks
• Lightweight & Reactive, Well-Adapted for Most Demanding-of-Free-Diving Use
• Blade Material: Special Reactive Thermo-Plastic
• Soft Elastomer Foot Pocket Anatomically Wraps-Around-Foot
• Foot Pocket Guarantees Perfect Transmission of Leg Fin Thrust
• Shock and Abrasion Resistant
• Snap Blade for High Efficiency
• Available in Multiple Sizes: 38/39 – 40/41 – 42/43 – 44/45 – 46/47

CRESSI Long Fin Bag:

• Unique-and-Functional Bag
• Space to Store Fins, Mask and Snorkel
• Easily Accommodates Longer Fins such as CRESSI GARA
• Comfortable and Secure Transportation
• Top Grab Handle
• Construction: Durable Nylon and Plastic Materials
• Zippered Closure for Easy Access
• Measurements: 92.7 cm x 24.77 cm x 15.25 cm
• Volume: 2,135 cubic inches (35 liters)
• Color: Black

The post CRESSI Gara Modular Long Freediving Full Foot Fins appeared first on My Blog.

CRESSI Gara Modular Impulse Freediving Full Foot Fins.

The Gara Modular system introduced by Cressi makes this a perfect choice for deep freediving and spearfishing for divers of all levels.
The modular design lets the user replace / interchange blades for specific diving purposes, which make the perfect fin to grow with, as the diver can change blades as their skills increase.

Any standard Fiberglass or Carbon Fiber long blade will interchange in minutes without any modifications to either.
The self adjusting footpocket is constructed with the most modern multi compound joining process to deliver a footpocket that can offer comfort and suppleness around the foot where desired and yet have stiffer compounds under the footpocket and heel area where power transfer takes place.

The angle of the blade 29 degrees,provides the ultimate in efficiency during the kick cycle requiring less energy to load the blade.
The fin can be comfortably worn with or without neoprene socks.

BLADE
The blade of the Gara Modular Impulse completes the range of Cressi fins, inserting a bending angle of 29 degrees, which allows you to further increase the dynamic performance of the fin.
The blade has an incredible resistance to any type of shock, impact or stress, making it almost impossible to break accidentally.

ANTI-SLIP WATER RAILS PREVENT WATER FLOW FROM ESCAPING SIDEWAYS
“RONDINE” TAIL SPECIAL DESIGN IMPROVES FIN CONTROL AND DIRECTIONALITY

FOOTPOCKETS
Gara Modular’s footpocket is wider than the other gara fin models. we suggest to use it with neoprene socks in order to have a proper fit.
For use without neoprene socks, we recommend to buy one smaller size.

INSOLE
INCLUDED GARA MODULAR INSOLE.
The new insole for Gara Modular fins is recommended for use with thin boots in temperate waters, because it improves the kick performance.
Thesemi-rigid material of the insole is completely recycled.
The insoles are supplied as a pair (right and left foot) and can be cut into their shape in three different sizes, according to pre-printed guidelines.
All fin components are also supplied separately.

CRESSI Gara Modular Impulse Freediving Full Foot Fins Features

• Thermoplastic rubber footpocket,certified Full Contact.
• Standard blade / stringer interface with screws under the footpocket and side clips.
• BLADE :
• Excellent propulsive performance without tiring anyone, beginners or professionals.
• Extremely thin and light blade in compound made of elastomerized technopolymers developed by Cressi with different thicknesses.
• Stringer consisting of technopolymers with elastomeric loads with high flexural modulus.
• Footpocket / blade angle of 29 degrees.
• Available in Multiple Sizes: 36/37 – 38/39 – 40/41 – 42/43 – 44/45 – 46/47
• Product Code: (36/37 BH095036) (38/39 BH095038) (40/41 BH095040) (42/43 BH095042) (44/45 BH095044) (46/47 BH095046)

The post CRESSI Gara Modular Impulse Freediving Full Foot Fins appeared first on My Blog.

CRESSI Reaction Pro Full Foot Fins.

CRESSI Reaction Pro full foot non-vented fins which has been developed after the Rondinella.
The CRESSI Reaction Pro fins frame is moulded using three different materials, according to the CRESSI patented system that guarantees surprisingly smooth and powerful kicking.
The first material is comfortable thermo-rubber (elastomer) anatomic, computer-designed foot pocket. The wide-soled foot is very comfortable and outstandingly enveloping thanks to the extensive use of elastomers material. Also, the soles are completely covered in thermo-rubber to give them an excellent grip on boat decks.
The second material is a new dual density (techno polymer) polypropylene which forms the blade, and in coupling with the third silicone-based material creates a channeling effect, which makes a high level of energy to be transferred in both up and down strokes of the kick pattern. The blade is rather long, and has a differentiated thickness – thicker at the front end of the foot, it gets progressively thinner towards the end of the blade.
The CRESSI Reaction Pro Full Foot Fins is designed and commonly used for Recreation diving, SCUBA, Snorkeling, Travel where they will surprise you with their fantastic performance.

CRESSI Reaction Pro Full Foot Fins Features

• Non-Vented Fin Design
• Revolutionary Blade Three-Material Design
• Foot Pocket: Thermo-Rubber Elastomer
• Blade: Techno-Polymer Polypropylene
• Channels: Silicone Based Material
• Patented Foot Pocket Design Increases Blade Area by 20%
• Dual Density Techno Polymer Blade Provides Power
• Silicone Based Blade Inserts Provides Channeling
• Easy, Nearly Effortless Kick
• Snap Blade for High Efficiency
• Shock and Abrasion Resistant
• Soft and Comfortable Foot Pocket
• Combine’s Lightness, Thrust, Comfort and Durability
• Available in Multiple Sizes and Colors

The post CRESSI Reaction Pro Full Foot Fins appeared first on My Blog.